Monday, August 9, 2021

Creo Jack Parts Modelling and Assembly

 1. Jack Part Modelling & Assembly

            Here's a new series of tutorials on Creo. These tutorials are on Jack Modelling and assembly. This type of Jack is mostly used for light 4-wheeler such Alto, Omni, Swift, Indica, i20, etc. You'll come to basic commands like round, mirror, symmetry, extrude, project, and some assembly commands.

Jack part

Watch tutorials here:- 

▶️ Part 1 - Top - HERE

▶️ Part 2 - Base - HERE

▶️ Part 3 - Leg & Pin - HERE

▶️ Part 4 - Bolt & Insert - HERE

▶️ Part 5 - Leg & Stopper - HERE

▶️ Part 6 - Jack Assembly - HERE      

See drawings HERE

2.  Creo Skateboard Tutorial

        This is a playlist of Creo 3.0 Tutorials. The Skateboard is sports equipment, where the deck is made up of wood and wheels of polyurethane. The truck assembly holds wheel assembly with deck. Here is a complete tutorial on skateboard parts and their assembly. 

Creo Skateboard

Watch these tutorials here:- 

1) Part 1 - Deck - See HERE

2) Part 2 - Skateboard Axle - See HERE

3) Part 3 - Base  - See HERE

4) Part 4 - Bolts & Nuts - See HERE

5) Part 5 - Spacers - See HERE

6) Part 6 - Wheel & Tire - See HERE

7) Part 7 - Washer & Bearings - See HERE

8) Part 8 - Truck-Sub Assembly - See HERE

9) Part 9 - Skateboard Final Assembly - See HERE

See drawings HERE

Creo 3.0 Download
    Click on the below button to start Creo 3.0 free download. 

Download ðŸ‘‰ HERE👈 for 64bit OS

I recommend you to use Internet Download Manager (IDM).
 for downloading at high speeds and disable Ad blockers to get the links.
Get Internet Download Manager HERE (password-"123")

Monday, August 2, 2021

SolidWork Tutorials

 Tutorial-1 - Sheetmetal Design

         This is a tutorial on sheet metal design in Solidworks. In this tutorial, you'll come to know about the basic tools of sheet metal workbench like base flange, edge flange, bend radius hole, relief command, and its types such as rectangular, tear, and obround.

Watch a tutorial here:

Sheetmetal Design

Get drawing for this tutorial here 👉 HERE

Tutorial-2 - Water Jar - Surface Part Modelling

         Here is a tutorial on the Surface part Modelling of a Water Jar in Solid Work. You come to know tools like revolve, extrude, sweep, trim, knit, and some more tools of surface designing from Solid Works.

Watch a tutorial here:

Water Jar

See drawings HERE

Tutorial-3 - Nitro Engine Cad Model || Part Modelling

        A nitro engine refers to an engine powered with a fuel that contains some portion (usually between 10% and 40%) of nitromethane mixed with methanol.
        Here I am with one new tutorial on Solid Works. In this tutorial, I'm going to show how to design a Nitro Engine model in Solid Works. In this tutorial, you will come to know about simple tools like boss-extrude, sweep, hole, pattern, fillet, etc. Also, in this tutorial, you will come to know about how to start difficult models with simple tools.

Watch a tutorial here:

Nitro Engine Cad Model

See drawings HERE

Tutorial-4 - Control Lever Shaft || Part Modelling

         Here's a tutorial on Solidworks for Control Lever Shaft Modeling. This model has a very different design. In this, we have to different plan to draw and extrude drawing at the start. So, look and have some hands-on basic tools of Solidworks.

Watch a tutorial here:

Control Lever Shaft

See Drawing HERE

Tutorial-5 - Screw Jack Modelling & Assembly || Part Modelling

        A screw jack is an example of a power screw in which a small force applied in a horizontal plane is used to raise or lower a large load. The mechanical advantage of a screw jack is the ratio of the load applied to the effort applied. 
        This tutorial is about designing Screw Jack in SolidWorks. In this, you come to parts of Screw Jack and how to design and assemble it. Here you'll learn simple tools like Extrude, Revolve, Helix for threads, also some assembly tools.
Screw Jack Modelling

Watch  a tutorial here:

▶️ Screw Jack - Part l - Watch HERE
▶️ Screw Jack - Part 2 - Watch HERE
▶️ Screw Jack - Part 3 - Watch HERE
▶️ Screw Jack - Part 4 - Assembly - Watch HERE
  
See drawings HERE

Tutorial-6 - 3D Advanced Part Modelling

        Here is a tutorial on Part modeling in SolidWorks. In this, you will come to know how to use multiple extrude/cut commands. So, watch completely and stay learning.

Watch tutorials here:

3D Advanced

See drawings HERE

Tutorial-7 - Surface Part Modelling

        Here is a tutorial on Surface Part Modeling in SolidWorks. In this tutorial, you will come to know about multi-trim, weldments, 3D sketch, trim, fillet, trim surfaces, and many more.

Watch a tutorial here:

Surface Part Modelling

See drawings HERE

Tutorial-8 - Elbow Pump Part Modelling

        This is a video series of how to design parts of the Elbow pump in SolidWorks using tools like extrude, extrude cut, revolve, hole, revolve cut, sweep, and also Assembly of Elbow Pump with the help of mate, copy with mate, and other few tools. 
Elbow Pump Part Modelling
Watch tutorials here:

    ▶ Video 1 - See HERE
    ▶ Video 2 - See HERE
    ▶ Video 3 - See HERE
    ▶ Video 4 - See HERE
    
        See drawings HERE